Google Shopping Products

INJORA 10g Brass Inner Clamp Rings for INJORA 0.7" D18 Wheels Add direct low-mounted weight to your 0.7" D18 wheels for easier weight tuning. Install the rings on the front...

INJORA 40×15mm 0.7" Crawler Tires for 1/30 Axial SCX30 (T7011) Note: Designed and tested exclusively with INJORA 0.7" wheels. Compatibility with wheels from other manufacturers is not guaranteed due to...

INJORA INJS11GD 11KG Waterproof High Voltage Coreless Servo for 1/24 1/18 RC Crawler Note: This is the gold version of INJS11, which has the same size as the INJS11 servo...

INJORA 0.7" 44*16mm XHX Pin Tires for 1/30 1/32 RC Crawlers (T7030) Note: Designed for custom and oversized 0.7 tire setups, 44mm is too large for the stock SCX30 and...

INJORA IR60-10 Hard Body with Interior & Bed Cage for 1/10 RC Crawler Notes: For best compatibility, INJORA 1/10 LCG chassis is recommended. Installation on an SCX10 III chassis may...

INJORA Stock Width Axles with Brass Steering Knuckles for 1/30 Axial SCX30 Note: If using stock SCX30 chassis links with INJORA axles, replace the original ball studs with those included...

INJORA 11KG INJS11B Waterproof Coreless Servo with Tray & Horn for 1/24 SCX24 AX24 Note: Please use the included servo mount and horn or the compatible INJS15 servo mount and...

INJORA 4pcs 90mm DRX Dual-Rate Spring Oil Shocks for 1/10 SCX10 III CJ7 Redcat Vertex-10 & 10W Note: Shock oil is not included. The length is measured eye-to-eye (hole-to-hole). Compatible...

INJORA Aluminum RC Car Stand with Shock Holder for 1/30 1/32 RC Crawler Suit for 1/30 1/32 micro RC cars such as: 1/30 Axial SCX30 1/32 Redcat Ascent-32 and so...

INJORA INJS15 Waterproof Coreless Servo with Mount & Horn for 1/18 TRX4M Note: This servo is compatible only with the included servo mount and horn or the INJS11 servo mount...

INJORA INJS15 Waterproof Coreless Servo with Tray & Horn for 1/24 SCX24 Note: This servo is compatible only with the included servo mount and horn or the INJS11 servo mount...

INJORA MB100 NANO Waterproof Brushed ESC 15A for 1/24 1/30 1/32 RC Crawlers Note: Compatible with SCX24, SCX30, etc. Radio system: Not compatible with the stock SCX24 / SCX30 radio...

INJORA 100Pcs Rubber O-rings for INJORA SCX30 Links Only compatible with these links: INJORA SCX30 Chassis Links SCX30-02BK INJORA SCX30 Chassis Links SCX30-02BB INJORA SCX30 Steering Links SCX30-05BK Features: Used to...

INJORA Silicone Rubber Tire Inserts for 0.7" 39-41mm Tires (TI07-40-14) Note: Due to differences in tire wall thickness across brands, compatibility with non-INJORA tires is not guaranteed. Please check compatibility...

INJORA Silicone Rubber Tire Inserts for 0.7" 36mm Tires (TI07-36-14) Note: Due to differences in tire wall thickness across brands, compatibility with non-INJORA tires is not guaranteed. Please check compatibility...

INJORA Stainless Steel High Clearance Links Set for 1/30 SCX30 Bronco JLU K10 Chassis Links Compatibility: Compatible with 1/30 Axial SCX30 Bronco, JLU, K10. Not compatible with 1/30 Axial SCX30...

INJORA +3mm Planet Axles with Brass Steering Knuckles for 1/30 Axial SCX30 Note:  If using stock SCX30 chassis links with INJORA planet axles, replace the original ball studs with those...

INJORA 40*15mm 0.7" King Trekker Tires for 1/30 Axial SCX30 (T7024) Note: Designed and tested exclusively with INJORA 0.7" wheels! Compatibility with wheels from other manufacturers is not guaranteed due...

INJORA D19 0.7" Aluminum Beadlock Wheels for 1/30 Axial SCX30 (W7008) Compatible with: 1/30 Axial SCX30 Note: Designed and tested for use with INJORA 0.7" tires Compatibility with tires from...

INJORA Aluminum Complete Transmission for Redcat Ascent-18 / Ascent-18 Apex Motor compatibility： Not compatible with Redcat Ascent-18 stock 180 brushed motor. Compatible with Redcat Ascent-18 / Ascent-18 Apex stock brushless...