INJORA +3mm Planet Axles with Brass Steering Knuckles for 1/30 SCX30

INJORA +3mm Planet Axles with Brass Steering Knuckles for 1/30 Axial SCX30

Note: 

• If using stock SCX30 chassis links with INJORA planet axles, replace the original ball studs with those included in the axle kit, as the screw length differs.
• Compatible with both INJORA and stock SCX30 servos, gears, steering knuckles, chassis links.
• Not compatible with original SCX30 size steering links and dogbone shafts as the axle housings are 3mm extended per side.
• Not compatible with stock SCX30 and INJORA diff covers.
• Use a small amount of blue threadlocker, such as 222/242/243, on metal-to-metal screws, and make sure the steering knuckles move smoothly.

Features:

• Planet-shaped differential housing, precision CNC-machined for a realistic scale appearance
• Integrated axle housing with scale-proportioned axle tubes for a more realistic, balanced look
• Ramped diff cover design helps the axle slide over obstacles more easily
• +3mm per side track width improves stability while maintaining scale proportions
• Upgraded stainless steel U-joint front axle shafts allow up to 46.3° steering angle
• 2/13T front and 2/16T rear gears create front overdrive for improved climbing traction and steering control
• Brass steering knuckles and steering links add front-end weight for improved climbing performance
• Custom-designed compact M2 wheel nuts specifically for SCX30 ensure secure wheel mounting

Specifications:

• Part Number: SCX30-25BKFR
• Housing Material: Aluminum
• Ramped Diff Cover Material: Aluminum
• Steering Links Material: Brass
• Steering Knuckles Material: Brass
• Gears & Shafts Material: Stainless Steel
• Shaft Type: U-joint
• Gear Ratio: 2/13T (Front), 2/16T (Rear)
• Maximum Steering Angle: Approx. 46.3°
• Overall Length: 75.4mm
• Front Axle Weight: 25.5g 
• Rear Axle Weight: 11.2g

Installation Tip: SCX30 uses very small hardware. Use the correct-size driver and light pressure. Tighten only until the screw is seated and snug, then stop. If you feel resistance before it is seated, or if the screw does not thread smoothly, stop and check the alignment before continuing.

Package List:

• 1 × Front Axle
• 1 × Rear Axle
• 1 × Torx Screwdriver
• 1 × Nut Tool (Brass)
• 1 × Assembly Manual
• 4 × Custom M2 Nuts