90Sell_90-149

INJORA High Torque Brass N30 PRO NANO Servo with Servo Saver for 1/30 Axial SCX30 INJORA Brass N30 PRO Servo is a more powerful option for Axial SCX30 builds, designed...

INJORA +4.5mm Planet Axles with Double Joint Shafts for 1/30 Axial SCX30 Note: If using stock SCX30 chassis links with INJORA planet axles, replace the original ball studs with those included...

INJORA 195mm LED Whip Light for 1/10 RC Crawlers Note: Requires the INJORA DG-L34 Light Controller (sold separately) to enable steady, breathing, and strobe light modes.  Features: Bright LED whip...

INJORA 10g Brass Inner Clamp Rings for INJORA 0.7" D18 Wheels Add direct low-mounted weight to your 0.7" D18 wheels for easier weight tuning. Install the rings on the front...

INJORA 11KG INJS11B Waterproof Coreless Servo with Tray & Horn for 1/24 SCX24 AX24 Note: Please use the included servo mount and horn or the compatible INJS15 servo mount and...

INJORA Silicone Rubber Tire Inserts for 0.7" 36mm Tires (TI07-36-14) Note: Due to differences in tire wall thickness across brands, compatibility with non-INJORA tires is not guaranteed. Please check compatibility...

INJORA 40*15mm 0.7" King Trekker Tires for 1/30 Axial SCX30 (T7024) Note: Designed and tested exclusively with INJORA 0.7" wheels! Compatibility with wheels from other manufacturers is not guaranteed due...

INJORA 0.7" D19 Ripple Black Coating Brass Beadlock Wheels for 1/30 Axial SCX30 (W7005) Compatible with: 1/30 Axial SCX30 Note: Designed and tested for use with INJORA 0.7" tires Compatibility...

INJORA MBL32-NANO Brushless ESC & 1621 Green Viper Motor 4300KV for 1/30 Axial SCX30 Note: Radio system: Not compatible with the stock SCX30 Radio. A transmitter and receiver with a...

INJORA Silicone Rubber Tire Inserts for 1.9" 120–124mm × 45–48mm Tires (1908) Fit Tire Outer Diameter: about 120-124mm Fit Tire Width: about 45-48mmCompatible with 1.9" Canyon Trail tires (TRX4 stock tires)Compatible...

INJORA BUG30 Body Shell with Magnetic Mount for 1/30 Axial SCX30 Compatible with: Axial SCX30 stock chassis INJORA SCX30 chassis Note: Installation requires removing the stock lights and light mounts...

INJORA D19 0.7" ModuWheel Wheels for Axial SCX30 Redcat Ascent-32 (MW7006) Compatible with: 1/30 Axial SCX30 1/32 Redcat Ascent-32 Note: Designed and tested for use with INJORA 0.7" tires Compatibility...

INJORA 34*12mm 0.7" MAVERIX M/T Tires for 1/30 Axial SCX30 (T7025) Note: Designed and tested exclusively with INJORA wheels. Compatibility with wheels from other manufacturers is not guaranteed due to...

INJORA Brass Skid Plate Transmission Mount for 1/30 Axial SCX30 Features: CNC-machined brass for precise fit and reliable strength Simple direct-replacement installation with no modifications required Adds low-mounted brass weight...

INJORA POM Rock Sliders for 1/30 Axial SCX30 Compatible with: SCX30 stock chassis INJORA aluminum SCX30 chassis  Features: POM construction, low friction and wear resistant Smooth surface helps the chassis...

INJORA Axle Worm Gear Set for 1/30 Axial SCX30 Note: We do not recommend pairing 2/12T front with 2/16T rear, as it may cause low-speed binding. 2/12T Overdrive Ratio: Increases...

INJORA Aluminum N30 NANO Servo with Servo Saver for 1/30 Axial SCX30 Features: CNC-machined aluminum servo case for added strength and durability Metal gear set built to handle higher steering...

INJORA Aluminum Transmission Kit for 1/30 Axial SCX30 (Assembly Required) Notes: Please use only the screws included by INJORA. Stock screws will not fit!Assembly is required. Apply appropriate grease to...

INJORA 0.7" D18 Aluminum 5-Spoke Beadlock Wheels for 1/30 Axial SCX30 (W7002) Compatible with: 1/30 Axial SCX30 Note: Designed and tested for use with INJORA 0.7" tires Compatibility with tires...

INJORA 36*14mm 0.7" Swamp Claw Tires for 1/30 Axial SCX30 (T7019) Note: Designed and tested exclusively with INJORA 0.7" wheels! Compatibility with wheels from other manufacturers is not guaranteed due...