INJORA Stainless Steel Heavy-Duty Drive Shaft for 1/10 RC Crawler
INJORA Stainless Steel Heavy-Duty Drive Shaft for 1/10 RC Car Crawler Axial SCX10 90046 AXI03007 TRX4 Redcat Gen8
Features:
- Universal Joint Style
- Stainless Steel Material, durable and rust-proof
- Splined Engagement, Fit 5mm output shaft
- 4mm Set Pins included to attach to pinion and transmission
- Scale Joint and Spline diameter size for realistic appearance
Specifications:
- Material: Stainless Steel
- Inner Diameter: 5mm (for 5mm shaft)
- Center Shaft Diameter: 8.8mm
- Weight: 34g 40g 45g 49g 55g 56g
- Screw pin size: M4*12mm
- Required tool: 2.0mm hex screwdriver
Total Length:
- 68-86mm (2.68-3.39in)
- 84-102mm (3.31-4.02in)
- 94-119mm (3.70-4.69in)
- 104-139mm (4.09-5.47in)
- 119-159mm (4.69-6.26in)
- 129-179mm (5.08-7.05in)
For SCX10 II: Front: 104-139mm or 119-159mm, Rear: 119-159mm
For 313mm TRX4: Front: 84-102mm, Rear: 94-119mm
For 324mm TRX4: Front: 94-119mm, Rear: 104-139mm
For 336mm TRX4: Front: 104-139mm, Rear: 119-159mm
Package List:
- 1* Drive Shaft
- 2* Screws
AGE & RECOMMENDATION: Not for children under 14 years. This is not a toy.
Prop 65: ⚠️ California Residents Prop 65 WARNINGS: www.p65warnings.ca.gov
Returns & Refunds: Return options may vary by region. Please see our Return & Refund Policy for details.
I'm really happy with the drive sharft you guys sent me and due to the first one getting lost in transit and being replaced with out delay im really happy and impressed, thanks guys
The item is very good quality but on my rig TRX 4 Defender the front part is rubbing into the plastic gearbox.I had to trim the plastic a little to fit.
Looks good in my Rig.
what’s the size for vanquish H10 optic, please?
Not compatible.
If my chassis needs 94mm which drive shaft should I then take ?
Will these fit a trx6?
it says m4 12mm but you dont sell that. only M4 11.3mm. and M3 12mm. which one is it?
What size would i need for a trx4 1/10 with a 12.3 wheel base
Same problem. I ordered the 82-102mm and 94-119mm they're too short.
What size would i need for a trx4 1/10 with a 12.3 wheel base
What size would i need for a trx4 1/10 with a 12.3 wheel base
For the trx4 with 313 wheelbase is 84-102 For the Front to Short. The original driveshaft for the frontaxle ist 101mm when it‘s installed. Same Problem at the rear axle. The original driveshaft ist 111mm when mounted.
What size do i need for trx 4 1/10??
Will these fit my k10 high trail?
Que tamaño necesito para un axial scx10 ii
What size for TRX4 324mm?
Thanks
Que tamaño necesito para un axial scx10 ii