INJORA Complete Transmission with 180 Brushed Motor for 1/18 TRX4M
INJORA CNC Aluminum Complete Transmission with 180 Brushed Motor 48T for 1/18 RC Crawler TRX4M Upgrade
Features:
- Motor waterproof rating: IPX6 (It can run in the rain, or run underwater for a while.)
- CNC aluminum machined transmission housing
- Includes transmission gears and ball bearings
- Greased
- Compatible with stock TRX4M ESC
- Compatible with INJORA and stock TRX4M skid plates
- Extremely high-strength neodymium magnets
- Stronger drag brake and torque delivery than stock motors
- Pinion and wiring are installed for placement into TRX4M
Transmission Specifications:
- Housing Material: Aluminum
- Color: Black
- Weight: 32g (1.13oz)
Internal Gears:
- Material: Stainless steel
- UD 59%: 40.3:1 underdrive gear set, decrease speed approx 59%
- As stock: 16.61:1 gear set, do no change speed
180 Motor Specifications:
- Part Number: INM11-48T
- Turn: 48T
- Rated Voltage: 7.4V
- Total Length: 42.7mm (1.68in)
- Motor Magnets: Neodymium magnets (Higher Torque)
- Pinion Material: Stainless Steel
- Pinion: 11T 0.4mod
- Weight: 39g (1.38oz)
- At No Load Speed: 20500rpm
- No Load Current: 0.48A
Package List:
1 * Complete Transmission 4M-55
1 * Brushed Motor INM11-48T
AGE & RECOMMENDATION: Not for children under 14 years. This is not a toy.
Prop 65: ⚠️ California Residents Prop 65 WARNINGS: www.p65warnings.ca.gov
Returns & Refunds: Return options may vary by region. Please see our Return & Refund Policy for details.
Very happy, this motor give a lot more of torque and can climb more easily. I bought the 59%ud and the Truck don't lose a lot of speed.
For the k10 👍🏻
This motor and transmission combo are fire. Super slow crawling and enough torque to twist your stock plastic driveline up like a candy cane and SNAP! Seriously though, it will destroy your garbage drive shafts. Upgrade those too. This thing has that kind of power. I watched many reviews and this setup can hold its own along side motors that cost 3 times as much. Not super quiet though, but who cares? Its a 4x4 truck, not some electric vehicle...oh wait.
This is way better than the stock motor and transmission highley recommend.
the product looks pretty but no sufficient instrucktion . where should i put the spacer?
Not a bad little replacement for the stock motor and transmission , does the job for the money
I’d recommend it
Crawling game changer compared to stock. Easy install. Do yourself a favour.
Just built a truck using this motor. Works great
Works really well with stock electronics. Works even better with injora esc/ receiver and radio combo.
Ended in second build, works perfectly with Injora esc
Fits right in to the stock mounting position with no issues, works excellent for building any crawler. Great torque even with 74mm tires
Runs really well but within 5 minutes I broke my stock diffs but other then that it made my ir40 build wayyyy better
I spent 4o bucks on a good motor but transmission that slips.not that happy.
FIX IT
The upgraded motor with the low range gears are great. Way better low-speed control and torque. Only thing I would change is have the wires a little longer and equal length
Great bang for the buck. A huge improvement compared to the stock motor. And when paired with the underdrive transmission gears, it runs almost as well as some of the leading brushless motors on the market.
Excellent piece of equipment, nice, smooth operation, surprisingly quiet. Only, due to so big reduction gear cat is a bit slow, but for crawling is top.
Would’ve been great if it worked correctly. I bought a whole injora build list for my high trail everything was great but this part.
Motor has more power than stock ne and with undergear transmission gears, crawling is a lot much better!
A must for your trx4m
Perfecta instalación, más rápido que el original y muy recomendable
Crawls better and goes faster
Exactly what I ordered high quality
Can you use the injora fatviper brushless motor on the injora transmission kit for the trx4m
No. Only compatible with INJORA 370 transmission.
Will this fit in a stock trx4m chasis
Yes, I think it is compatible.
Is this compatible with stock Traxxas receiver & transmitter ?
Yes, compatible.
I bought one and the tires tire backwards turn backwards on my stock remote and esc how do I fix?
Was it marked as spam? Please try checking your spam folder.
I bought one and the tires tire backwards turn backwards on my stock remote and esc how do I fix?
I did not get one try this email
I bought one and the tires tire backwards turn backwards on my stock remote and esc how do I fix?
I have contacted you. Please check your email.
I bought one and installed it but the tires tire backwards when I press the trigger to go forward how do I fix this? (I have stock esc and remote)
I have contacted you. Please check your email.
Does it make the car slower than with the original transmission and motor
Bonjour, Mon TRX-4M pèse 920 grammes. Ce moteur avec l'ensemble de pignons de sous-multiplication (59%) va tenir le coup ? d'avance merci.
Le voiture va moins vite avec cette transmission et moteur.
Will you make a metal transmission for the fms LC80?
No plan.
Compatible with fcx18 lc80?
No
Can I use 24.4:1 Gears for this transmission?
Que transmisor/ESC recomiendan para usar con este motor?
SKU: T6DC-MB100-R80
what is the size of the output shafts on a injora 180 transmission?
what is the size of the output shafts on a injora 180 transmission?
The outputs match perfectly with the injora driveshafts, so no issues if you buy a set of those as well. Definitely recommended over the stock trx4m plastic cv joint shafts.