INJORA 370 Brushed Motor Kit with 7SV2 Remote Control System for 1/18 TRX4M

INJORA 370 Brushed Motor Kit with 7SV2 Transmitter Remote Control System for 1/18 RC Crawler TRX4M
Note:

• 370 motor is not compatible with the stock TRX4M ESC.
• Battery Requires: 2S Li-Ion battery with PH2.0 or JST connector (such as SCX24 batteries)
• Compatible with stock TRX4M skid plate

Compatible with: 1/18 RC Crawler TRX4M
Features:

• INJORA 370 motor adopts a 3-slot design
• High strength magnets for excellent torque
• It delivers a supremely linear response even at low speeds
• 3 different throttle speeds available
• 3CH 2.4GHz Transmitter with 2 in 1 Receiver ESC
• Elevate your TRX4M with the most cost-effective DIY solution available.

370 Motor Specifications:

• Pinion Material: Steel
• Pinion: 9T (Stock TRX4M: 11T)
• Rated Voltage: 7.4V
• Total Length: 43.5mm (1.71in)
• Motor Diameter: 24.4mm (0.96in)
• At No Load Speed: 17300rpm
• No Load Current: ●0.68A

Transmission Specifications:

• Internal Gear: 16.6/1 (same as stock)
• Gear Material: Nylon
• Greased
• Contains 6 steel bearings

Transmitter and ESC Specifications:

• Channels: 3
• RF Range: 2.4GHz
• Frequency mode: FHSS
• RF Power: less than 20dbm
• CH3 Button Function: yes
• Low voltage warning: yes (less than 4V)
• Powered by: 6V DC (4*1.5AA ) (Battery NOT included)
• Display mode: LED indicator
• Size: 4.72*2.36*8.07inch
• ESC Mode: F/B/R (F=Forward B=Brake R=Reverse)

Package List:
1 * 370 Motor
1 * Transmission & Skid Plate
1 * 3CH 2.4G Transmitter
1 * 2 in 1 Receiver and ESC
1 * JST to PH2.0 Adapter (JST Male/PH2.0 Female)