Brands

INJORA Stainless Steel High Clearance Links Set for 1/30 SCX30 CJ-7 Compatible with: 1/30 Axial SCX30 CJ-7 Note: Compatible with 1/30 Axial SCX30 CJ-7. Not compatible with 1/30 Axial SCX30...

INJORA Stainless Steel Drive Shafts for 1/30 SCX30 CJ-7 Compatibility: Compatible with 1/30 Axial SCX30 CJ-7. Not compatible with 1/30 Axial SCX30 Bronco, JLU, K10, Tacoma. Features:  Stainless steel construction...

INJORA Black Coating Brass High Clearance Chassis Links for 1/30 SCX30 Tacoma Compatible with: 1/30 Axial SCX30 Tacoma. Note: Compatible with 1/30 Axial SCX30 Tacoma. Not compatible with 1/30 Axial...

INJORA Stainless Steel Drive Shaft for 1/24 SCX24 Gladiator Power Wagon (41mm/70mm) Note: Compatible with SCX24 Gladiator, Power Wagon Compatible with 155mm wheelbase INJORA 1/24 LCG chassis kit (INC-24L-C) Features:...

INJORA Brass LCG Chassis Kit for 1/30 SCX30 Bronco JLU K10 Tacoma Note:The brass surface may oxidize and darken over time. This is normal and does not affect performance. Compatibility:...

INJORA Stainless Steel High Clearance Links Set for 1/30 Axial SCX30 Tacoma Chassis Links Compatibility: Compatible with the 107mm wheelbase SCX30 Tacoma. When installing the chassis links on INJORA Planet Axles,...

INJORA Stainless Steel Drive Shafts for 1/30 Axial SCX30 Tacoma Compatibility: Compatible with 1/30 Axial SCX30 Tacoma. Not compatible with 1/30 Axial SCX30 Bronco, JLU, K10, CJ-7. Features: Stainless steel...

INJORA 1.9" Aluminum Beadlock Wheels for 1/10 RC Crawlers, 0mm Offset (W1916) Features: CNC-machined aluminum for precision and durability Multi-spoke design with machined cutouts for a modern off-road look 0mm...

INJORA 11T Worm Gear for INJORA WG24 Transmission Features: Stainless steel construction for durability Replaces the original 12T worm gear in the INJORA WG24 transmission (SCX24-200BK) Changes the WG24 transmission...

INJORA WG24 Worm Gear Transmission for 1/24 SCX24, Brass Housing, 13.75:1 The INJORA WG24 brass worm gear transmission offers smooth, controlled low-speed crawling for SCX24 builds. The brass housing adds...

INJORA WG24 Worm Gear Transmission for 1/24 SCX24, 13.75:1 INJORA WG24 worm gear transmission for SCX24 focuses on smoother, more controlled low-speed crawling performance.It is a direct-fit upgrade for SCX24...

INJORA 1.0" Aluminum Beadlock Wheels for Micro Crawlers (W1030), Chrome, -2.5mm Offset Features: CNC-machined aluminum for high precision and durability -2.5mm offset design provides increased track width Multi-round-hole wheel face...

INJORA 1.3" 72*24mm XHX Pin V2 Tires (T1321) (4) The XHX Pin V2 tires feature wider spacing between the tread pins and firmer foam inserts for better tire support. They...

INJORA Stainless Steel High Clearance Chassis Links Set for SCX30 Bronco JLU K10, +3mm/+5mm Rear Extension Designed to extend the rear wheelbase of your Axial SCX30, these rear links move...

INJORA RC Adapter Cable, ZH1.5 to JR, ZH1.5 to Futaba Features: Available in ZH1.5 Male to JR Male and ZH1.5 Female to Futaba Female options. Plug-and-play design makes it easy...

INJORA Brass Diff Covers for 1/10 SCX10 III CJ7 AR45 Axle Motobilt Compatibility: Compatible with SCX10 III Motobilt Compatible with SCX10 III AR45 Axles Not compatible with SCX10 III AR45P...

INJORA V2 +4mm Nylon Planet Axles for 1/24 SCX24, Double Joint Shafts, Ramped Diff Covers Features: The V2 Planet Axles feature nylon ramped diff covers for smoother sliding over obstacles...

INJORA Titanium LCG Chassis Frame Rails for 1/32 Redcat Ascent-32 V1 V2 Note: Compatible with both Redcat Ascent-32 V1 and V2. Hardware is not included. Reuse the stock screws for...

INJORA IR80-30 Pickup Hard Body for 1/30 SCX30 Bronco JLU K10 Note: Compatible with 1/30 Axial SCX30 Bronco, JLU, K10. Compatible with INJORA SCX30 Chassis Kit. Not compatible with 1/30...

INJORA D19 0.7" Brass Beadlock Wheels for 1/30 Axial SCX30, Chrome-Plated / Black-Plated (W7016) Note: Designed and tested for use with INJORA tires. Compatibility with tires from other brands may...