INJORA 1.0" Stamped Steel -3.78mm Offset Wheels for Micro Crawlers (W1004)

Awesome products 👌

Bought these wheels two years ago and they have been nothing but great. Got them with a pair of 57*22mm rock terrain and they are great. They haven’t gotten too beat up after allot of abuse. I’m glad I went with these ones. Have taken them apart several times and non of the screws stripped

He's a good Wheels I have others with a little bit deeper dish on the Wheel but these are bad at all

Very high quality wheels! They look amazing and are very easy to assemble. They fit the trx4m defender well and I would highly recommend them!

Very satisfied with this item.

My son wanted different wheels and “sticky tires” like I have. These wheels fit the truck and gave it that 80’s look we were going for! Thanks Injora!

Looks grate

I have a lot of wheels….Some Injora, some LGRP, some MoFo but nothing goes with any truck and any build like white wagon wheels. I could literally re-wheel every truck in the fleet and the white wagon wheels look legit. Certain LGRP tires get finicky with them and usually involves some harsh language and possibly an animal sacrifice, only to pinch a tire in between some rocks and yard the bead out again, then it’s off to find more animals….its not that bad but some finesse is in order. Assembly is yeah kinda sorta not more better, its fine until the rear hub needs go on then its tire work by Braille. Bead seating can be challenging as well due to wheel being steel and relatively thin. But if your shopping for that garage built grunge wagon look these wheels are it, seriously my son and I have at some point had them on every truck between us and every one looked legit.

Together with good quality tires, this is the first upgrade to all of our SCX24s. They are great looking wheels, very well made and add a touch of weight down low, as well as widening the track width by almost 8mm, noticeable improving stability.

Fit my SCX24 C10 and the white looks sort of 'period' to me. Easy to install.

Great basic wheels, I drilled them to vent.

What will be the offset of this wheels, if I position the hexes from outside?
Thank you.

Very nice parts with great quality.

they look good, hard to put together, but I also didn't know how to do bead lock wheels, so this may be as much user error as manufacturer

Good little wheels but it should be a classic 3 pieces instead of this mind breaking 4 pieces set, was a bit weird to put together...
I like the result anyway

Perfect

When I used the included aluminum spacers, the original OE tire lip kept coming out of the wheel as I tightened the screws. When I added the Traxxas 9780 wheel weights, it fit perfect. Not sure why this happened, but that was my experience.

One of the top aftermarket parts places out there!

Adding offset and style at the same time. Beware that you will need a 1.3mm hex to assemble, also hard to install with factory provided wheel wrench due to the increased offset.

I got them on and took the car out and I noticed 3 of the wheels wobble a bit but most likely my fault when put together, any tips would be appreciated. Thank you!

I love how these look and can’t wait to test the performance but I haven’t been able to get them to lock on properly to the Traxaxs Mickey Tomson tires, that’s the only downside I’ve found!

Had to order tool to assemble. Listing of size prior would be helpful.

Fit and look great.

Great rims with a realistic appearance. Easy to mount even without using the longer screws.

Perfect! They look great!

I've always loved the steel whitespokes on my fullsize wheelers and these are just as awesome! Great fit and finish, no burrs anywhere and easy to mount tires!

So far things seem nice have not had a chance to install them

When the shocks extend to full articulation, they like to bind up when having been screwed into the stock spring mounts.

I'm Very impressed with all the parts I ordered from Injora, These deep dish wheels are sexy and very high quality.

A little hard to put together

I have bought two sets of these wheels so far. They look really nice, I have one set in white and one in rose gold. Both look really nice, and fit the Injora tires perfectly. I have used mine with the Injora brass rings and different types for Injora tires, with both stock foams and with some 3D printed inserts I made.

The only issue is that the holes are drilled a bit off, so they only go together one way, and it's a bit fiddly to get them lined up properly. Once that is done though, you dan manage even without the long screws that come with them.