INJORA 2PCS Metal CVD Drive Shaft for Traxxas TRX-4
- Come with the fixed screws
- Made of high quality metal
- Easy to install and durable in use
- Material: Metal Alloy
- Quantity: 2Pcs
- Weight: 59g 48g
- Shaft Length: 98-128mm 121-155mm
AGE & RECOMMENDATION: Not for children under 14 years. This is not a toy.
Prop 65: ⚠️ California Residents Prop 65 WARNINGS: www.p65warnings.ca.gov
Returns & Refunds: Return options may vary by region. Please see our Return & Refund Policy for details.
I love Injora parts for my RC's but the design for these particular driveshafts is extremely poor, the collar that holds the pins into place in the joints failed twice within the first 5 minutes of use both times. The collar is held in place by a rubber o-ring and a little bit of grease and all it took is crawling over a rock and the collar was knocked free causing both of the pins in the joint to fall out and the driveshaft came apart locking up my TRAXXAS TRX4 stopping it dead in it's tracks. Luckily the first time it happened I was able to find both pins and put the driveshaft back together. I tried using heat shrink to fix the issue and hold the collar in place but on the TRAXXAS TRX4 2021 Bronco Chassis. Where the front driveshaft connects to the transmission TRAXXAS left absolutely no room for heat shrink or anything to fit over the joint, I was able to manage to get heat shrink over that particular spot but it's such a tight spot the heat shrink got bound up on the chassis causing unneeded stress on everything which will damage and can strip major components. The super tight fit between the chassis chewed up and completely ripped the heat shrink apart so I did another run without that one spot covered with heat shrink and within minutes the exact same failure occurred and I lost both joint pins to the joint on the front driveshaft. I wouldn't recommend these particular driveshafts to anyone they won't last and fail to do their job, the design for these driveshafts needs to be improved immaculately
I put this drive shaft on my trx4 sport and I took it out to test it and it fell apart as soon as I came upon a rock, I got stuck in 2wd. So yeah. I love the other stuff so far like bumpers and the weights. Mabey bad luck, mabey bad manufacturing.
conforme à la description mais pas encore monter
very nice product all good !!!
look good product
look good product
Fast shipping.
Excellent packaging.
Very good finish and quality.
nice drive lines....that do not fit my TRX4 axles.... solid drive lines tho
Three bon service merci
OK
Very nice looking, can't wait to install
Very quickly got the parcel. Recommend
All perfect thanks for all good good quality ok
salut a tous bien reçue!!!! la qualité toujours aux rendez vous comme toujours!!!!! arbre de transmission parfait!!!! excellente qualité de chez INJORA en espèrent que INJORA ne change sont mode de fabrication et de qualité , et de tarif des objet mécanique ou autre!!!! et aussi sa rapidité de livraison!!!!
Lack of proof looks good
About 10 minutes after I started running, the red ring part slipped and the connection pin came off and the shaft fell off, making it impossible to run.
Well enough executed, Lufts only in the head, Cardan on 313 base go the same length TRX4
Product as described, very good all indicate!
Material ok, injora never disappoints
Drive shaft and stay out of the sending back but came from as below and to be glad. The quality is very good.
Looks nice!
Excellent cardans. On TRX rose without dopylivaniya
great seller one of my all-time favorite stores
In appearance, the appearance is made well, the quality time will show
thanks
Rear shaft sleeve/female side too long, doesn't allow full suspension compression... bottoms out... need to cut 5-10mm off...