New Arrivals

INJORA Axle Worm Gear Set for 1/30 Axial SCX30 Note: We do not recommend pairing 2/12T front with 2/16T rear, as it may cause low-speed binding. 2/12T Overdrive Ratio: Increases...

INJORA 4.7g Brass Inner Clamp Rings for INJORA 0.7" D18 Wheels Note: Only compatible with INJORA 0.7" D18 wheels such as: W7001 W7002 Features: CNC-machined brass inner clamp rings Each...

INJORA 65T 030-Size Brushed Motor for 1/30 Axial SCX30 Features: High-torque strong magnetic power A 65T motor with wire and PH2.0 connector installed Faster than the stock SCX30 88T motor...

INJORA Stainless Steel U-joint Axle Shafts for 1/30 Axial SCX30 Features: Stainless steel construction for improved wear resistance and durability Upgraded front axle U-joint design to replace the stock dogbone-style...

INJORA G2 57*22mm 1.0" Rock Terrain Tires for 1/24 1/18 RC Crawler (T1005) Compatible with INJORA Silicone Rubber Inserts: 1056 Features: Molded in the Super Soft & Sticky INJORA S5...

INJORA Black Coating Brass High Clearance Chassis Links for 1/18 Redcat Ascent-18 APEX Only compatible with 1/18 Redcat Ascent-18 APEX Not compatible with other Redcat Ascent-18 vehicles Features: +2mm front upper...

INJORA Roverin M30 G2 FOC Sensored Brushless ESC & Motor Combo for 1/18 TRX4M Ascent-18 Brushed(4800KV) What's New in G2?The Roverin M30 G2 features essential hardware upgrades to improve reliability...

INJORA 8mm & 10mm Acetate Cloth Tape for RC Wiring Features: Used for keeping RC wiring clean, organized and professional-looking Suitable for bundling and securing ESC, servo, receiver, and motor...

INJORA ModuWheel 1.3" Brass & Aluminum Beadlock Wheels Set, Negative Offset, for 1/18 1/24 RC Crawlers Note:  Only recommended for modified RC crawlers, 70mm is too large for most 1/24...

INJORA ModuWheel 1.0" Brass & Aluminum Beadlock Wheels Set for 1/18 1/24 RC Crawlers Suit for mini rc crawlers, such as: 1/24 Axial SCX24, AX24 1/24 FMS FCX24, 1/18 FCX18...

INJORA 1.0" Brass -4.7mm Offset Wheels Set for 1/18 1/24 RC Crawlers Suit for mini rc crawlers, such as: 1/24 Axial SCX24, AX24 1/24 FMS FCX24, 1/18 FCX18 1/18 Traxxas...

INJORA MBL32-NANO Brushless ESC for 1/30 Axial SCX30 Note: Radio system: Not compatible with the stock SCX30 Radio. A transmitter and receiver with a CH2 port are required. Pre-configured and...

INJORA Aluminum Servo Saver for 1/30 Axial SCX30 Compatible with: Stock Axial SCX30 servo  INJORA N30 servo INJORA N30 Pro servo Features: CNC-machined aluminum servo saver for precise fit  ...

INJORA Aluminum N30 NANO Servo with Servo Saver for 1/30 Axial SCX30 Features: CNC-machined aluminum servo case for added strength and durability Metal gear set built to handle higher steering...

INJORA Aluminum Transmission Kit for 1/30 Axial SCX30 (Assembly Required) Notes: Please use only the screws included by INJORA. Stock screws will not fit! Assembly is required. Apply appropriate grease...

INJORA Aluminum Front & Rear Axle Housing Set for 1/30 Axial SCX30 Notes: Please use only the screws included by INJORA. Stock screws will not fit! Features: CNC-machined aluminum alloy...

INJORA Custom M2 3.0 Stainless Steel Wheel Nuts for 1/30 Axial SCX30 Note: Use your own 2.0mm hex driver with the included nut tool for easier installation and removal of...

INJORA 0.7" D18 Aluminum 5-Spoke Beadlock Wheels for 1/30 Axial SCX30 (W7002) Note: Designed and tested for use with INJORA 0.7" tires! Compatibility with tires from other brands may vary...

INJORA 0.7" D18 Aluminum 6-Spoke Beadlock Wheels for 1/30 Axial SCX30 (W7001) Note: Designed and tested for use with INJORA 0.7" tires! Compatibility with tires from other brands may vary...

INJORA 40*14mm 0.7" XHX Pin Tires for 1/30 Axial SCX30 (T7021) Note: Designed and tested exclusively with INJORA 0.7" wheels! Compatibility with wheels from other manufacturers is not guaranteed due...