90Sell_150+

INJORA WG24 Worm Gear Transmission Gearbox for 1/24 SCX24 INJORA WG24 worm gear transmission for SCX24 focuses on smoother, more controlled low-speed crawling performance. It is a direct-fit upgrade for...

INJORA 10.1g Brass Inner Clamp Rings for INJORA 0.7" D19 Wheels Add direct low-mounted weight to your 0.7" D19 wheels for easier weight tuning. Install the rings on the front...

INJORA 0.7" 44*16mm XHX Pin Tires for 1/30 1/32 RC Crawlers (T7030) Note: Designed for custom and oversized 0.7 tire setups, 44mm is too large for the stock SCX30 and...

INJORA IR60-10 Hard Body with Interior & Bed Cage for 1/10 RC Crawler Notes: For best compatibility, INJORA 1/10 LCG chassis is recommended. Installation on an SCX10 III chassis may...

INJORA INJS15 Waterproof Coreless Servo with Mount & Horn for 1/18 TRX4M Note: This servo is compatible only with the included servo mount and horn or the INJS11 servo mount...

INJORA 1pcs receiver connector wire for INJORA MBL32 ESC Only compatible with: INJORA MBL32 G2 Brushless ESC INJORA MBL32 NANO Brushless ESC Feature: This product is used to connect INJORA...

INJORA Stainless Steel High Clearance Chassis Links & Steering Links Set for 1/30 Axial SCX30 Note: Steering links are compatible with SCX30 stock axles. Not compatible with INJORA +3mm Planet...

INJORA +3mm Planet Axles with Brass Steering Knuckles for 1/30 Axial SCX30 Note:  If using stock SCX30 chassis links with INJORA planet axles, replace the original ball studs with those...

INJORA Silicone Rubber Tire Inserts for 0.7" 39-41mm Tires (TI07-40-14) Note: Due to differences in tire wall thickness across brands, compatibility with non-INJORA tires is not guaranteed. Please check compatibility...

INJORA MB100 G2 Waterproof Brushed ESC 40A for 1/24 1/18 RC Crawler SCX24 TRX4M Note: Compatible with SCX24, TRX4M, Ascent-18, etc. Radio system: Not compatible with the stock SCX24 / TRX4M/...

INJORA 36mm Big Bore Oil Shock Absorber for 1/24 SCX24 FCX24M These big bore shocks feature threaded bodies for quick pre-load adjustments.Internally, they use shock oil (not included) instead of...

INJORA Black Coating Brass High Clearance Chassis Links for 1/30 Axial SCX30 Note: The links are supplied unassembled. Pivot balls need to be installed during assembly. Features: CNC-machined brass for...

INJORA LS(Lower Spring) 59mm Aluminum Oil Shocks for 1/18 TRX4M Note:  The shock oil is not included. Add preload using the threaded collar for stronger rebound. Features: CNC-machined aluminum construction...

INJORA D19 0.7" Brass Beadlock Wheels for 1/30 Axial SCX30 (W7007) Compatible with: 1/30 Axial SCX30 Note: The color difference compared to other brass wheels is due to a passivation...

INJORA LCG Aluminum Chassis Kit for 1/30 Axial SCX30 Compatible with: 1/30 Axial SCX30 Bronco, JLU, K10 Features: Premium 7075 Aluminum: CNC-machined rails for maximum rigidity and a lower center...

INJORA Black Coating Brass High Clearance Chassis Links for 1/18 Redcat Ascent-18 APEX Note: Only compatible with 1/18 Redcat Ascent-18 APEX Not compatible with other Redcat Ascent-18 vehicles Features: +2mm...

INJORA Custom M2 3.0 Stainless Steel Wheel Nuts for 1/30 Axial SCX30 Note: Use your own 2.0mm hex driver with the included nut tool for easier installation and removal of...

INJORA ModuWheel 1.0" Brass & Aluminum Beadlock Wheels for 1/18 1/24 RC Crawlers Features: High precision CNC aluminum machined Replaceable wheel faces modular design Negative offset offers wider spacing, enhance...

INJORA DRX Dual-Rate Spring Oil Shocks for 1/10 RC Crawlers, 80mm / 90mm / 100mm / 110mm / 120mm Note: Shock oil is not included. The length is measured eye-to-eye...

INJORA LED Whip Light for 1/18 1/24 RC Crawlers Note: A light controller (sold separately) is required to enable steady, breathing, and strobe light modes. Features: 4 Color Options –...