Axial SCX30 Tacoma vs. CJ-7: What's Different, and Which Upgrades Fit?

Axial SCX30 Tacoma and CJ-7

Axial SCX30 Tacoma vs. CJ-7: What's Different, and Which Upgrades Fit?

The Axial SCX30 is small enough to turn a tabletop and a few rocks into a crawler course. With the addition of the Toyota Tacoma TRD Pro (Tacoma) and Jeep CJ-7 (CJ-7), there are now three different wheelbases to choose from.

The Ford Bronco (Bronco), Jeep Wrangler JLU (JLU), and Chevrolet K10 (K10) all share a 99 mm wheelbase. The Tacoma stretches that to 107 mm, while the CJ-7 takes it down to 91 mm.

What surprised us was how much the new models still have in common with the original three. If you're choosing your first SCX30 or wondering whether you can reuse the upgrades you already own, here's what you need to know.

Axial SCX30 green Toyota Tacoma and red Jeep CJ-7 side by side

1. Meet the Tacoma and CJ-7

Tacoma — 107 mm wheelbase

The Tacoma is the longest of the five models and comes in two editions:

  • Green Rock Crawler: Larger tires, a wider stance, and tube-style bumpers.
  • Tan Overland: Full fenders and a more conventional bumper setup.

Both have the same wheelbase. If you're planning a tire upgrade, though, the differences in tires and bodywork are worth a closer look.

CJ-7 — 91 mm wheelbase

The CJ-7 is the shortest of the five and also comes in two editions:

  • GenRight Crawler: An exposed roll cage.
  • Classic Renegade: A removable hardtop.

They run different wheels, tires, and bumpers, but both use the same short-wheelbase platform.

Axial SCX30 wheelbase comparison: Tacoma 107 mm, Bronco 99 mm, and CJ-7 91 mm

All five models at a glance

We've also measured the stock tires on our own SCX30 trucks to give you a useful reference when choosing tire upgrades.

Model Wheelbase Body style Stock tire diameter
Tacoma (Green) 107 mm Pickup 37 mm
Tacoma (Tan) 107 mm Pickup 34 mm
Bronco 99 mm SUV 34 mm
JLU 99 mm Four-door Jeep 34 mm
K10 99 mm Classic pickup 36 mm
CJ-7 (Green) 91 mm Compact two-door Jeep 34 mm
CJ-7 (Red) 91 mm Compact two-door Jeep 37 mm

Tire diameters were measured manually by the INJORA team. Actual diameters may vary by approximately 0.5–1 mm.

Stock tire size comparison across five Axial SCX30 models

2. How does wheelbase affect crawling?

The 16 mm difference in wheelbase between the Tacoma and CJ-7 can make a noticeable difference on a crawling course.

  • Tight turns: The CJ-7's shorter wheelbase makes it easier to maneuver in confined spaces.
  • Crossing gaps: The Tacoma's longer wheelbase gives it an advantage when bridging gaps between rocks.
  • Climbing over ridges: A shorter wheelbase generally helps reduce the risk of getting hung up on the skid plate.

So which one should you choose?

  • CJ-7: A great choice if you appreciate scale realism, authentic body proportions, and compact builds.
  • Tacoma: A great choice if you prioritize crawling performance and enjoy tackling larger obstacles.

3. Which upgrades are model-specific?

Before ordering parts for a new SCX30, there are a few areas worth checking: suspension links and driveshafts, chassis rails, bodies, and bumpers. Some depend on wheelbase, while others depend on how the truck is built.

1) Suspension links and driveshafts

These are the most obvious parts that need to be model-specific. With the Tacoma's longer wheelbase and the CJ-7's shorter wheelbase, both models require different lengths of suspension links and driveshafts. The existing 99 mm sets for the Bronco, JLU, and K10 cannot be reused on either model at its stock wheelbase.

Here are the upgrades we offer for each model:

Upgrade Tacoma CJ-7
High-clearance suspension links Tacoma links CJ-7 links
Stainless steel driveshafts Tacoma driveshafts CJ-7 driveshafts

2) Chassis

Here's a detail that might surprise you: although the Tacoma has a longer wheelbase, it shares the same chassis as the Bronco, JLU, and K10.

We've checked the fit of our existing low-center-of-gravity (LCG) chassis on the Tacoma. Both our aluminum LCG chassis kit and brass LCG chassis kit are compatible.

For example, if you're transferring parts from an upgraded Bronco to a Tacoma, you can reuse the LCG chassis. You just need Tacoma-length suspension links and driveshafts for the new wheelbase.

The CJ-7 is different. It uses its own shorter chassis rails, so neither of those kits is a direct fit.

Axial SCX30 Tacoma and Bronco chassis comparison with bodies removed

3) Bodies

Even when two trucks share the same chassis rails, their bodies aren't necessarily interchangeable.

Imagine putting a 99 mm body on a stock Tacoma. Even if you could line up the body mounts, the wheel arches would still be spaced for a shorter wheelbase. The wheels wouldn't sit where they should.

That's why our IR80-30 pickup body and BUG30 body, designed for the 99 mm models, aren't direct-fit options for the stock Tacoma or CJ-7.

4) Bumpers

On the SCX30, bumpers are mounted directly to the body rather than the chassis. Since different bodies have different mounting points and hole spacing, bumpers are body-specific and cannot be used interchangeably. Make sure you choose a bumper designed for your specific body.

4. Which upgrades fit all five SCX30 models?

Here's the good news: you don't have to start your next build from scratch. All five SCX30 models share many of the same components, particularly in their axles and drivetrain.

1) Axles and axle upgrades

All five models share the same standard factory front and rear axle assemblies. Many upgrades designed for those axles can therefore be carried over, including:

There's an important exception if you've replaced the entire axle. Let's say you've installed +3 mm widened axles on your CJ-7. The steering links designed for the factory axle may no longer be the right length. In that case, choose the steering links that match your new axle, rather than the truck.

An easy way to remember it:

  • Suspension links need to match the wheelbase and suspension layout;
  • Steering links need to match the axle width and steering layout.

2) Wheels and tires

INJORA 0.7-inch wheels are compatible with all five SCX30 models. When choosing wheels and tires, there are two things to consider:

  • Wheel and tire compatibility: Our 0.7-inch tires are designed for INJORA wheels and are not compatible with the stock SCX30 wheels. We recommend upgrading the wheels and tires together. Compatibility with other brands' wheels is not guaranteed.
  • Tire clearance: Larger tires provide more ground clearance under the axles, but they can also rub against the fenders or bumpers.

As our measurements show, even different editions of the same model can come with different stock tire sizes. When choosing larger tires, consider both the original tire diameter and the available space around the fenders and bumpers.

3) Motor, transmission, and steering servo

Motor and transmission: All five SCX30 models use the same stock motor and transmission, so existing motor and transmission upgrades are also compatible with the Tacoma and CJ-7.

Steering servo: All five SCX30 models use the same stock steering servo, so servo upgrades are compatible with all five models.

Final thoughts

The Tacoma and CJ-7 make the SCX30 a more interesting platform to build on. The choice between them comes down in part to how much room you have on your course and which body style you enjoy. And if you already have a box of SCX30 upgrades, there's a good chance some of them will have a second life on your next build.

You can explore the available INJORA SCX30 upgrades here.

RELATED ARTICLES

Leave a comment

Your email address will not be published. Required fields are marked *

Please note, comments must be approved before they are published