INJORA MBL32 NANO Brushless ESC for 1/30 Axial SCX30
INJORA Green Viper 1621 Brushless Motor 4300KV for 1/30 SCX30
INJORA Aluminum Front & Rear Axle Housings for 1/30 SCX30
INJORA Aluminum Servo Saver for 1/30 SCX30
INJORA Aluminum Front Rear Bumper for 1/30 SCX30 Bronco
INJORA 8mm & 10mm Acetate Cloth Tape for RC Wiring
INJORA Aluminum Front Rear Bumper for 1/30 SCX30 JLU
INJORA Aluminum Stinger-style Bumper for 1/30 SCX30 JLU
INJORA Aluminum Front Rear Bumper for 1/30 SCX30 Chevrolet K10
INJORA 100Pcs Rubber O-rings for INJORA SCX30 Links
INJORA Rod End Replacement Kit for INJORA SCX30 Chassis Links
INJORA Stock Width Axles with Brass Steering Knuckles for 1/30 SCX30
INJORA 0.7" 35*14mm King Trekker Tires for 1/30 SCX30 (T7014) (4)
INJORA 0.7" 34*12mm MAVERIX M/T Tires for 1/30 SCX30 (T7025) (4)
INJORA 0.7" 39*15mm HAMROK Tires for 1/30 SCX30 (T7027) (4)
INJORA 0.7" 41*14mm Cling On Tires for 1/30 SCX30 (T7020) (4)
INJORA 0.7" 41*14mm MAVERIX M/T Tires for 1/30 SCX30 (T7028) (4)
INJORA 0.7" 40*15mm King Trekker Tires for 1/30 SCX30 (T7024) (4)
INJORA 0.7" 40*15mm Crawler Tires for 1/30 SCX30 (T7011) (4)
INJORA 0.7" 44*16mm XHX Pin Tires for 1/30 1/32 RC Crawlers (T7030) (4)
FAQs about SCX30 Upgrade Parts
The most popular first upgrades for the SCX30 are:
- Tires and wheels – improve traction, stability, and climbing performance
- Brass parts – lower the center of gravity and add front-end weight
- Servo upgrades – provide stronger and more precise steering
- Motor upgrades – improve low-speed control, smoothness, and power
- Shocks – improve suspension performance and sidehill stability
Yes. Brass parts lower the center of gravity and add front/low weight, improving climbing and stability.
Most SCX30 drivers start with:
- Brass steering knuckles – often the most effective first upgrade for front-end traction
- Brass diff covers – add low axle weight for better crawling stability
- Brass skid plate – adds weight low in the chassis to help lower the center of gravity
- Brass wheels / wheel weights – add low rotating weight and improve stability and tire contact
Note: A balanced setup works best. Too much brass can reduce efficiency and increase drivetrain wear.
A servo upgrade is especially useful after adding heavier or larger components.
You may benefit from a stronger servo if you install:
- Larger tires
- Heavier wheels
- Brass parts
- Wider axles
- A more demanding crawling setup
A higher-torque servo can provide:
- Stronger steering under load
- More precise steering response
- Better control on technical terrain
Metal gears can also improve durability for crawling use.
Many SCX30 owners upgrade to brushless systems for smoother low-speed control, better throttle precision, and improved crawling performance.
However, it is a more advanced upgrade than a brushed motor swap.
You will usually need:
- A compatible brushless ESC
- A new transmitter and receiver
Additionally, the electronics should be compact to fit the limited SCX30 interior space.
Because of these requirements, brushless upgrades cost more and require more planning than simply swapping a brushed motor, but they deliver a noticeable improvement in control and driving feel.
The best tires for the SCX30 depend on whether you prefer a realistic scale look or maximum crawling performance.
Soft compound crawler tires usually provide the best grip on rocks and technical terrain.
Larger and wider tires can also improve traction and obstacle clearance.
Many SCX30 drivers also upgrade to beadlock or brass wheels to improve stability, traction, and overall crawling performance.Tires are widely considered one of the most effective upgrades for the SCX30.
