Upgrade Parts

INJORA CH3 Light Remote Control Switch, LED On/Off Breath Flash Controller for RC Car Features: Compatible with: JR Futaba Male Plug Connector Three Lighting Modes: Steady, breathing, and strobe Manual:...

INJORA CNC Aluminum 4mm Extended Front Rear Complete Axles for 1/18 RC Crawler TRX4M TRX4MT Note: Compatible with both INJORA and stock TRX4M chassis, servo mounts, diff covers, gears, C...

INJORA 41*14mm 0.7" Cling On Tires for 1/30 Axial SCX30 (T7020) Note: Designed and tested exclusively with INJORA 0.7" wheels. Compatibility with wheels from other manufacturers is not guaranteed due...

INJORA D19 0.7" Aluminum Beadlock Wheels for 1/30 Axial SCX30 (W7008) Compatible with: 1/30 Axial SCX30 Note: Designed and tested for use with INJORA 0.7" tires Compatibility with tires from...

INJORA 94g Brass Internal Beadlock Wheel Ring Clamp Rings Fit 1.9" Wheel Rim For RC Crawler Axial SCX10 II 90046 TRX4 VS4-10 Note: the wheel rims are not included. Some...

INJORA 0.6"/0.7" Beadlock Wheel & MAVERIX M/T Tire Set for 1/30 Axial SCX30 (W6701) Note: Wheel and tire assembly is required The wheel and tire feature different sizes on each...

INJORA MB100 G2 Waterproof Brushed ESC 40A for 1/24 1/18 RC Crawler SCX24 TRX4M Note: Compatible with SCX24, TRX4M, Ascent-18, etc. Radio system: Not compatible with the stock SCX24 / TRX4M/...

INJORA 36mm Big Bore Oil Shock Absorber for 1/24 SCX24 FCX24M These big bore shocks feature threaded bodies for quick pre-load adjustments.Internally, they use shock oil (not included) instead of...

INJORA 8mm & 10mm Acetate Cloth Tape for RC Wiring Features: Used for keeping RC wiring clean, organized and professional-looking Suitable for bundling and securing ESC, servo, receiver, and motor...

INJORA MAVERIX M/T 1.9" S5 Crawler Tires (4.19" OD) (T1927) (4) Features: Molded in the Super Soft & Sticky INJORA S5 Compound Dense, closely spaced tread blocks provide consistent traction...

INJORA 10g Brass Inner Clamp Rings for INJORA 0.7" D18 Wheels Add direct low-mounted weight to your 0.7" D18 wheels for easier weight tuning. Install the rings on the front...

INJORA 4pcs Silicone Rubber Inserts For 108-110mm (4.35" OD) 1.9" Tires Fit Tire Outer Diameter: 108-110mm (4.35" OD)Fit Tire Width: about 36mmFeatures: Soft and super soft, two hardness are optional...

INJORA Brass High Clearance Links Set for 1/18 RC Crawler TRX4M High Trail K10 Upgrade (4M-97) Only compatible with: 1/18 TRX4M High Trail K10 1/18 TRX4M High Trail F150 1/18 TRX4MT K10...

INJORA 1.0" 64*24mm Tires & Silicone Rubber Inserts Combo (4) (T1011) Suit for mini rc crawlers, such as: 1/24 Axial SCX24, AX24 1/24 FMS FCX24, 1/18 FCX18 1/18 Traxxas TRX4M...

INJORA 050 Brushed Motor 50T 66T for 1:24 RC Crawler Axial SCX24 Upgrade PartsNotes: These 050 motors require a different mounting plate with 2 extra holes. 050 motors are longer...

INJORA Turbine 1.9" Deep Dish Aluminum Beadlock Wheels for 1/10 RC Crawler Features: High-precision CNC-machined aluminum construction 82g per wheel helps keep your rig planted on climbs and sidehills -11mm...

INJORA IR60-10 Hard Body with Interior & Bed Cage for 1/10 RC Crawler Notes: For best compatibility, INJORA 1/10 LCG chassis is recommended. Installation on an SCX10 III chassis may...

INJORA 65T 030-Size Brushed Motor for 1/30 Axial SCX30 Features: High-torque strong magnetic power A 65T motor with wire and PH2.0 connector installed Faster than the stock SCX30 88T motor...

INJORA 1 Pair Stainless Steel High Clearance Chassis Links for 1/18 TRX4M Defender Bronco High Trail K10 F150 Features: Plastic rod ends Brass link balls Made of 304 stainless steel...

INJORA INJS035 Digital Servo 35KG Large Torque Waterproof Servos for RC Car Crawler SCX10 TRX4 Truck Robot PartsUsage: For RC ModelsFeatures: High performance digital standard servo Reinforced metal gears and...