Upgrade Parts

INJORA Offset -8.9mm Metal 1.9" Beadlock Wheel Rim Deep Dish Hub for 1/10 RC Crawler Car TRX4 Axial SCX10 90046 UTB18 (W1948)Suit for: 1/10 RC CrawlersFeatures: Deep dish stamped steel...

INJORA 1.3" 68*24mm Gripmax S4 Tires for 1/18 1/24 RC Crawlers (T1350)   Compatible with INJORA Silicone Rubber Inserts: 1370 Features: Designed to fit 1.3" wheel rims     Molded...

INJORA S5 1.9" Cling On Tires 120*42mm for 1/10 RC Crawler (T1920)Features: Aggressive pattern and design for superior grip  Long lasting and super consistent performance Made in the Super Soft...

INJORA 2PCS Brass Heavy Counterweight Front Caster Blocks Portal Drive for RC Crawler Traxxas TRX-4 TRX-6 8232 Upgrade Parts Suit for: 1/10 RC Crawler Traxxas TRX-4 TRX-6 Features: Easy to...

INJORA Complete Gearbox Transmission Gears Set 1/10 RC Crawler Car Axial SCX10 SCX10 II 90046 Upgrade Part Suit for: 1/10 RC Crawler Axial SCX10 II 90046 Features: Made of good...

INJORA +4mm Double Joint Shafts Planet Axles & Servo Kit for 1/24 Axial SCX24 Upgrade Features: Planet-Inspired Axle Design: Planet-shaped differential housing, precisely CNC-machined for a highly realistic scale appearance. Seamless...

INJORA Silicone Parts Tray with Tool Stand (160*160mm)Suit for: 1/24 1/18 Scale RC CrawlersKeep your workspace organized and efficient with this silicone parts tray, designed for model builders, DIY enthusiasts,...

INJORA Metal Rear Bumper for 1/10 RC Crawler Car Axial SCX10 90046 SCX10 III AXI03007 Upgrade PartsSuit for: 1/10 RC Crawler SCX10, SCX10II & SCX10 IIIFeatures: Easy to install and...

INJORA 1.0" 40g/pcs Brass Beadlock Wheels Offset -4.7mm for 1/24 1/18 RC Crawler SCX24 FCX24 TRX4M Ascent18 (W1011) Features: Negative Offset 4.7mm Made of brass, 40g per wheel Offer additional...

INJORA S5 Kraken Claw 1.9" 4.80" OD M/T Tires (4) (122*42mm) Features: INJORA 1.9" mud terrain tires Deep and aggressive lug pattern Made in the Super Soft & Sticky INJORA...

INJORA MBL32 G2 Waterproof Brushless ESC & 1721 Purple Viper Outrunner Motor for 1/18 TRX4M Ascent-18 Note: Programming Tutorial Please do not flash or modify the firmware by yourself. Any...

INJORA Micro BEC(Battery Eliminator Circuit) for 1/18 TRX4MFeatures: Keep the output voltage stable for your micro servos. (Stock micro rc electronics are typically pretty weak and need a boost when...

INJORA Stainless Steel Center Drive Shafts for 1/18 HPI Venture18 HobbyPlus CR18PCompatible with: 1/18 HPI Venture 18 1/18 HobbyPlus CR-18P EVO PRO Features: Made of stainless steel, in phase design...

INJORA Aluminum Rear Hubs for Losi Micro-B Micro-T Compatible with: 1/24 Losi Micro-B 1/28 Losi Micro-T Features: Simple installation, directly replaces stock parts High precision CNC machined Made of lightweight,...

INJORA Quick Change Allen Key Hexagon Screwdrivers Hex Nut Drivers RC Tool Kit for 1/24 Axial SCX24 FMS FCX24 Micro Crawler CarSuit For 1/16 1/18 1/20 1/24 Scale Mini RC...

INJORA S5 122*36mm 1.9" XHX Pin Wheel Tires for 1/10 RC Crawler Car (T1923) Compatible with: 1/10 RC Crawler Car Features: Perfectly spaced XHX-Shaped pins dig into any surface Made...

INJORA 39*15mm 0.7" HAMROK Tires for 1/30 Axial SCX30 (T7027) Note: Designed and tested exclusively with INJORA wheels. Compatibility with wheels from other manufacturers is not guaranteed due to differences...

INJORA 41*14mm 0.7" Cling On Tires for 1/30 Axial SCX30 (T7020) Note: Designed and tested exclusively with INJORA 0.7" wheels. Compatibility with wheels from other manufacturers is not guaranteed due...

INJORA Aluminum Servo Saver Set for Arrma Mojave Typhon Granite Grom Losi Nascar (25T) Compatible with: 1/12 Losi Nascar 1/14 Typhon Grom 1/16 Mojave Grom 1/18 Granite Grom 1/16 Mini...

INJORA Brass Front Bumper Mount Servo Stand for 1/10 RC Crawler Car Traxxas TRX4 TRX-4 8237 Upgrade Parts Note: If use it to install the servo, it need to change...